A new technique for fluid velocimetry based on near field scattering

We show that the time evolution of near-field scattering speckles, originated by a fluid suspension of particles, provides information about the velocity field in the fluid. This information can be extracted from a statistical analysis of speckle fields taken at different times, either by measuring their cross-correlation function or by recovering the power spectrum corresponding to the difference between the two speckle fields. Experimental data are in accordance to the expected behaviors. The results are independent of the scatterer's size, allowing one to exploit the technique also with sub-wavelength tracking particles.     

超声光栅实验及其多普勒频移的一种简单研究方法

采用光子学方法,对超声光栅衍射实验和实验中出现的多普勒频移现象进行了研究,所得结论与采用光的波动性观点的惠更斯-菲涅耳原理及傅里叶变换等常规方法相同.该方法进一步加深了对衍射的本质和光的粒子性的理解并对光子的信息传递能力有初步的认识.     

激光准直Cr原子束的实验研究

利用多普勒原理对Cr原子束进行横向准直.应用激光感生荧光技术稳定激光器的频率，把激光器的中心频率稳定在偏离Cr原子共振中心频率-5±0.26MHz的位置.根据理论计算出准直激光束的最小尺寸为13.7mm.根据实验数据选择合适的参数，实现利用多普勒原理横向准直Cr原子束，使原子束的横向分布缩小到原来的1/3. 关键词： 激光准直 激光感生荧光稳频 多普勒冷却     

从电子上看康普顿效应

在康普顿效应中，散射光子与入射光子的频率不同，但在电子静止的参考系，可以证明光子的频率在碰撞前后相同。     

原子光谱线增宽的原因

本文从理论上给出了原子光谱线增宽的几种原因 ,即 :①自然线宽 ,它是原子的内禀特性 (即在跃迁中所涉及到的能级的特性 ) ;②多普勒增宽 ,它是原子无规则热运动的结果 ;③碰撞增宽 ,它是原子间相互作用的结果。并对这几种原因分别给出了数量级上的估算。对原子光谱的测定具有参考意义。     

一种可用于离面位移测量的光路的优化设计

为了实现对复杂三维物体表面轮廓、小空间内物体的纵向位移或振动等测量，有必要研制高分辨力、非接触的光学检测系统。由于激光多普勒技术具有动态响应快、线性度好、非接触、测量精度高等特点而优先被用于复杂三维物体离面位移的测量。但是物体表面散射光的多普勒信号非常微弱，因此解决信号的强度、信噪比则是实现测量的关键。研究了激光多普勒技术及散射光相位的无规变化的统计规律，设计出一种空间分辨力很高的参考光路，将它用于固体离面位移测量效果很好，其相对误差为0．3％。     

Dynamical measurements on viscoelastic behaviors of spiders in electro-dynamic loudspeakers

Spiders in electro-dynamic loudspeakers are most commonly concentrically corrugated fabric disks, and their viscoelastic behaviors affect the loudspeaker reproductions. A noncontact dynamic measuring technology is presented by a subwoofer closed box to excite the tested spiders pneumatically with a Laser Doppler Vibrometer (LDV) to measure the velocity of the moving spiders. Correlation techniques were employed to get an accurate and reliable acoustical transfer function between the measured velocity and sound pressure. The Young’s moduli of the tested spider composite materials were derived from the measured vibration modes. The creep effect and the level dependent behaviors of tested spiders were investigated. The results indicate that, the Young’s moduli of the tested spiders are frequency dependent. The mechanical stiffness increases with a small slope in low frequency range while a large slope in high frequency range. The loss factor exhibits the maximum around the resonance frequency, and after that it decreases with increasing frequency. The effective stiffness has a monotonic decrease with input voltage levels and the harder the spider, the less stiffness changes with input levels.     

SNR enhancement for composite application using multiple Doppler vibrometers based laser ultrasonic propagation imager

In recent years, the technology of using laser ultrasonic propagation imaging for damage visualization of composite structures were applied to real-world applications. Among many choices of sensor for the Ultrasonic Propagation Imager, the laser interferometry has several advantages: it is non-invasive, and portable, and with extraordinarily long-range measurement. However, the critical issue with interferometry sensing is its low signal-to-noise ratio (SNR), where the background noise can mask the damage-induced waves and making it impossible to identify the damages, especially in composite structures. In this paper, we propose a hardware-based SNR enhancement technique using multiple Laser Doppler Vibrometers (LDVs). The out-of-plane mode of ultrasonic signals are measured by multiple LDVs at a common sensing point and then averaged in real time. We showed that the SNR enhancement in experiments was consistent with the theoretical prediction, and also the test results showed a clear improvement for damage visualization of structures using Ultrasonic Wave Propagation Imaging and Ultrasonic Wavenumber Imaging algorithms.     

基于车载通信标准街道场景的电磁散射信道模型

针对室外无线信道视距(line of sight,LOS)/非视距(non-line of sight,NLOS)传输环境下的车到车(vehicular-to-vehicular,V2V)通信系统,本文提出了一种基于标准街道散射的统计信道模型,其移动发射机(mobile transmitter,MT)与移动接收机(mobile receiver,MR)处于运动状态,街道两旁分布的散射体固定.由几何模型出发又引入了一种随机的参考信道模型,其散射体有无穷多个,均以平行于街道两侧的散射条纹形式均匀分布在三维(three dimensional,3D)空间的一个二维(two dimensional,2D)矩形内部.在室外街道通信环境下,模型推导了散射信道中发射角(angle of departure,AOD)以及到达角(angle of arrival,AOA)的概率密度函数(probability density functions,PDFs)解析式;研究了多普勒功率谱密度(power spectral density,PSD)及其时间自相关函数(autocorrelation function,ACF);分析了模型多普勒参数以及街道散射体等因素对V2V通信系统性能的影响.与城市、农村的测量信道对比分析,表明本模型仿真的统计特性符合理论与实际,拓宽了室外V2V无线通信信道建模的研究.为评估室外V2V通信系统的传输特性、仿真无线通信系统提供了有力的研究工具.     

多普勒效应测试仪的改进

为了解决电磁波多普勒效应在实验室演示的困难，采用单片机和一系列大规模集成电路设计了一种演示电磁波多普勒效应的测试仪器，分析了电磁波的多普勒效应原理，给出了该仪器的组成结构，介绍了该仪器铁特点。